Burkert Type 6012P Direct Mount Pilot Solenoid Valve

Burkert's Type 6012P, a variation of the Type 6012 has been developed as a special pilot valve for direct attachment to externally piloted pneumatic actuators. It's special Polyamide housing and nickel-plated brass banjo bolts make connection to the pilot air port of the actuator easy.

The 6012P 3/2 way, normally closed direct acting pilot solenoid valve is tough, reliable and simple to connect to existing valves and air supplies.

Key features:

• Polyamide Housing
• Sizes: 6mm push fit, G 1/8 and G 1/4.
• Banjo bolt material: Brass, nickel plated.
• Seal material: NBR banjo screw, FKM valve.
• Manual Override
• DIN Connector
• Screws Directly into Inlet Port
• Pressure range: 0-10 Bar.
• Voltage: 24V DC, 24V AC and 230V AC.
• Media temperature: -10°C to +100°C.
• Ambient temperature: Maximum +55°C.

Protection class IP65. Also available as a standalone, threaded valve - the Burkert Type 6012.

Images are for illustrative purposes only and may not be an indication of all variations/sizes of the product.

Datasheet:

 Burkert Type 6012P Direct Mount Pilot Solenoid Valve Datasheet

 Burkert Type 6012P Direct Mount Pilot Solenoid Valve Operating Instructions