Stainless Steel Solenoid Valve Direct Acting 1/2" to 2"

Stainless Steel Solenoid Valve Direct Acting 1/2" to 2"


in-stock Available to Order

Key Features
  • Normally Closed
  • Zero Pressure Required 
  • Stainless Steel Body
  • Options for FKM, EPDM or NBR seals
  • Sizes: 1/2" to 2"
  • Pressure range 0 - 10 Bar
  • Voltage: AC and DC Options
  • Suitable for use with mildly corrosive or slightly aggressive media


Stainless Steel Solenoid Valve Direct Acting 1/2" to 2"

Our Stainless-Steel Solenoid Valve is a Direct Acting valve and is therefore suitable for use on systems where no pressure is present using only the valves internal workings to isolate the media, unlike servo assisted valves that require a minimum pressure differential across the valve. The function of this valve is Normally Closed and when power is applied it will open. Offered in sizes from 1/2" to 2" it is designed for use with contaminated or slightly aggressive media. Applications that include vacuum, low pressure, gravity fed and open loop systems.

The solenoid valve consists of a CF8M Stainless Steel body and a choice of FKM, EPDM or NBR seals.

Offers high flow rates and the ability to work with zero pressure differential: making it one of the most popular valves in our range!

Key Features:

  • Media: Vacuum, water, alkali and slight acid
  • Available in sizes: 1/2" to 2"
  • Voltage:  various AC and DC supply options
  • Ambient temperature: -10 °C to + 60 °C
  • Media temperature: 120 °C max (dependent upon seal material)
  • Media viscosity: 50 centistokes max
  • Operating pressure: 0 – 12 Bar
  • Supplied with cable plug


 Stainless Steel Solenoid Valve Direct Acting Datasheet

*To help you select the correct solenoid valve please use the data found on our Technical Information tab.

Technical Attributes

Process / Industry General Purpose
Body Material Stainless Steel
Design 2 Way
Port Size 1/2", 3/4", 1", 1 1/4", 1 1/2", 2"
Manufacturer VOLT