Pneumatic Actuated WRAS Lugged PN16 Butterfly Valve
Pneumatic Actuated WRAS Approved Lugged PN16 Butterfly Valve
The VOLT pneumatic actuated butterfly valve is suitable for use on potable water and the valve carries a WRAS Approval.
The valve is a Lugged and Tapped pattern design which will fit onto PN16 flanges. It has an epoxy coated ductile iron body, a stainless steel disc and shaft with an EPDM liner.
The actuators are manufactured from aluminium, have a hard anodised finish and are ATEX approved/CE marked.All actuators are designed to the latest ISO/NAMUR standards which allow direct mounting of pilot solenoids and switchboxes.
This valve is commonly used for applications such as ‘End of Line Duty’ or fitted before a pump for maintenance isolation.
Key Features:
- Spring Return or Double Acting Actuator
- Lugged and Tapped to suit PN16 Flanges
- Epoxy Coated Ductile Iron Body
- Stainless Steel Disc and Shaft
- EPDM Liner
- Temperature: -10°C - 120°C
- Sizes: 2" to 12"
- WRAS Approved

Approval
Datasheet:
Pneumatic Actuated WRAS Approved Lugged PN16 Butterfly Valve Datasheet
Design | Lugged |
---|---|
Flange Accomodation | PN16 |
Body Material | Ductile Iron |
Size | 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100), 5" (DN125), 6" (DN150), 8" (DN200), 10" (DN250), 12" (DN300) |
Disc Material | Stainless Steel |
Liner | EPDM |
Industry / Approvals | WRAS |
Manufacturer | VOLT |
The following downloads are available for the Pneumatic Actuated WRAS Approved Lugged PN16 Butterfly Valve:
Pneumatic Actuated WRAS Approved Lugged PN16 Butterfly Valve Datasheet