Mars Ball Valve Series 77
Details
Mars Ball Valve Series 77 3 Piece Stainless Steel Ball Valve
Mars Ball Valve Series 77 3 Piece Full Bore Direct Mount ball valve is a fully maintainable isolating valve; providing a cost-effective solution for the 'shut-off' of medium flows.
A general purpose, reliable ball valve with Stainless Steel body, reinforced PTFE seat and ISO direct mount top.
Body seals are easy to replace and / or maintain in-line without the need for disassembly, simply by dropping the swing out body.
Live loaded stem packing compensates for wear and fluctuations.
UHMWPE Seats available on request.
Key features:
- Stainless Steel body
- RPTFE Seats
- Direct Mount
- Full Bore
- Screwed BSP, Socket Weld, But Weld or NPT
- Sizes: 1/4" to 4"
- Temperature range: -20°C to 200°C
- Operating pressure: 1000 PSI
- Insulated grip, lockable lever handle
- Movement: 90° turn
Investment cast with low torque.
Datasheet:
Mars Ball Valve Series 77 3 Piece Full Bore Direct Mount Datasheet
Technical Attributes
| Manufacturer | Mars |
|---|---|
| End Connection | BSP, NPT, Socket Weld, Butt Weld OD |
| Body Material | Stainless Steel |
| Seat Material | Reinforced PTFE |
| Size | 1/4" (DN8), 3/8" (DN10), 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100) |
| Design | 3 Piece, Full Bore, Female x Female |
| Industry / Approvals | ATEX |
| Lever | Lockable Manual Lever |
| Temperature Range | -20°C to 200°C |
| Pressure | Up to 1000 PSI |
| Actuatable? | Yes - features ISO Direct Mounting Pad |
Downloads
The following downloads are available for the Mars Ball Valve Series 77 3 Piece Full Bore Direct Mount:
Mars Ball Valve Series 77 3 Piece Full Bore Direct Mount Datasheet
