TLV V1 Quick Trap Connector with Isolation Valve on Inlet
Part of the QuickTrap series of products the V1 from TLV is an in-line connector. Constructed from stainless steel with an integral strainer and bellows sealed isolation valve, the V1 features the QuickTrap universal flange with a two bolt connection system allowing the safe, quick and easy replacement of a steam trap and correct installation position regardless of piping orientation (direction of flow does need to be selected to ensure correct operation of the isolation valves). By including the isolation valve on the inlet, space and time are saved on the initial installation and any maintenance that may need to be carried out.
Available in stainless steel sizes 1/2" to 1" with Socket Weld connections. The actual operating conditions are limited by the trap unit selection, however the theoretical maximum operating points are 46 BarG for pressure and 400°C.
For a full trapping station, a QuickTrap steam trap unit is also required, where you have a choice of the Free Float Traps (S3 and S5), Thermodynamic (P46UC) or Thermostatic (L32).
Key Features:
QuickTrap connector only (Steam trap unit also required)
Stainless Steel Construction
Integral Strainer
Integral Isolation Valve on inlet
Sizes 1/2" & 3/4"
Socket Weld End connections
Max Operating Pressure: 46 BarG*
Max Operating Temperature: 400°C*
*Actual condition limitation is governed by trap selection.