Details

ARI CONA S Ball Float Steam Trap Type 25.631....120 SG Iron

The ST5403 is an ARI CONA S SG Iron Flanged PN40 ball float steam trap with an integral automatic air vent, strainer and non-return protection. It provides fast and efficient condensate drainage with prompt air removal to ensure process systems and equipment operate to its maximum potential.

ARI-CONA S Ball float steam trap offers reliable condensate discharge in all kinds of steam systems. Offered in sizes from 1/2" (DN15) up to 2" (DN50) and supplied with integral non return and strainer protection.

The ARI-CONA S is flanged to PN40 and offered with various allowable differential pressures (ΔPMX).

Benefits:

• For major fluctuations in pressure and condensate load – instant discharge with no temperature loss! For discharge of condensate at boiling temperature.
• High performance: Instant discharge of condensate without subcooling and backwater, even with extreme fluctuations of pressure and volume.
• Integral check valve function as standard for high performance and economy. Benefit for you: Extremely economical because there is no need for a separate check valve in line.
• Float and thermostatic controller with automatic air venting / and level control for high performance and economy. Exceptionally robust ball float for long life.
• Rapid system start-up due to thermostatic control element.
• Optimum handling: converts easily from vertical to horizontal installation and vice versa.

Key Features:

• Figure: 25.631....120
• Flanged PN40
• SG Iron Body
• Sizes: 1/2" (DN15) to 2" (DN50)
• Inside Strainer, Non-Return Protection
• Easy to Install
• Mounting Position: Vertical
• Maximum Allowable Pressure: 32 Bar g at 250°C
• Maximum Allowable Temperature: 350°C

Datasheet:

 ARI CONA S Ball Float Steam Trap Flanged PN40 - SG Iron Datasheet

 ARI CONA S Datasheet Overview