PTFE Lined Stainless Steel Butterfly Valve
- PTFE Lined Butterfly Valve
- 316 Stainless Steel Body, Shaft & Disc
- Wafer Pattern
- PTFE liner
- Lever (up to 6") or Gearbox Operator
- Sizes: 2" to 8"
- To fit between PN6/10/16, ANSI 150, Table D & Table E flanges
Customers Also Bought
-
WRAS Approved EPDM Lined Stainless Steel Butterfly Valve
From £173.29SKU: BF5012 Availability: Available -
Stainless Steel Pneumatic Actuator
From £213.34SKU: AP9025 Availability: Available -
Stainless Steel Butterfly Valve - Viton (FKM) Lined
From £250.11SKU: BF5015 Availability: Available -
All Stainless Steel Pneumatic Actuated Butterfly Valve
From £600.08SKU: PA5016 Availability: Available
Details
Stainless Steel Butterfly Valve - PTFE Liner
Our Stainless Steel Butterfly Valve with PTFE Liner is a reliable manual butterfly valve featuring a 316 Stainless Steel body, shaft and disc and an ISO mounting top for actuation. It is suitable for a wide range of chemical, process and aggressive or corrosive environments; where the aseptic value of Stainless Steel is a requirement.
This butterfly valve is maintenance free, economical and suitable to fit between PN6/10/16, ANSI 150, Table D and Table E flanges.
Complies with 97/23/CE (PED) Directive CE 1115.
Key features:
- Wafer Pattern
- Lever (up to 6") or Gearbox Operator
- Sizes: 2" to 8"
- PTFE Line
- Temperature range: -10°C to 130°C
- Pressure rating: PN16
- Lever operated with position plate to ISO 5211
Electric or pneumatic actuation available with a choice of options including solenoid and/or switchbox.
Datasheet:
Technical Attributes
| Design | Wafer |
|---|---|
| Flange Accomodation | PN6, PN10, PN16, ANSI 150, Table D, Table E |
| Body Material | Stainless Steel, Stainless Steel 316L |
| Size | 2" (DN50), 2 1/2" (DN65), 3" (DN80), 4" (DN100), 5" (DN125), 6" (DN150), 8" (DN200) |
| Disc Material | Stainless Steel 316L |
| Liner | PTFE |
| Manufacturer | VOLT |
Downloads
The following downloads are available for the PTFE Lined Stainless Steel Butterfly Valve:
