Brass Ball Valve with Spring Close Lever
- Brass Body
- Spring Close Lever (Deadmans Handle)
- Full bore
- Screwed BSPP
- Sizes: 1/2" to 2"
- Temperature range: -10°C to 170°C
- Pressure rating: PN40
Customers Also Bought
-
Brass Ball Valve Screwed 3 Way
From £29.44SKU: BV5072 Availability: Available -
WRAS Approved Male x Female Brass Ball Valve - Red Butterfly Lever
From £4.87SKU: BV5033 Availability: Available -
Gas Approved Compression End Brass Ball Valve
From £5.11SKU: BV5044 Availability: Available -
Brass Manual Ball Valve with Limit Switchbox
From £112.64SKU: LS5070 Availability: Available
Details
Brass Ball Valve with Spring Close Lever
Our Brass Ball Valve with Spring Close Lever (Deadmans Handle) is a non-maintainable full bore ball valve; providing safe operation for both general and industrial chemical applications. An economical, compact and reliable valve in Screwed BSPP with a Nickel plated body.
Used to 'shut-off' medium flows on a wide range of liquid and gaseous duties including drain and blow down, gauge isolation and test points.
Key Features:
- Brass nickel plated body
- Spring Close Lever (Deadmans Handle)
- Screwed BSPP End Connections
- Available in sizes: 1/2" to 2".
- Temperature range: -10°C to 170°C.
- Pressure rating: PN40.
Datasheet:
Technical Attributes
| Manufacturer | VOLT |
|---|---|
| End Connection | BSP |
| Body Material | Brass |
| Seat Material | PTFE |
| Size | 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50) |
| Design | Full Bore, Female x Female |
| Industry / Approvals | HVAC |
| Lever | Spring Close Lever (Deadmans Handle) |
| Temperature Range | -10°C to 170°C |
| Pressure | PN40 Rated |
| Actuatable? | No - Manual Only |
Downloads
The following downloads are available for the Brass Ball Valve with Spring Close Lever:
