burger Menu
cross
quote
0 Items
Quote
basket basket-added
0 Items
Go to cart
cross
We accept:
maestro mastercard visa worldpay jcb
Close Menu
Shop
Accounts
  1. Back

Mars V Sector Control Ball Valve Series 88

Mars V Sector Control Ball Valve Series 88

SKU
BV4700

in-stock Available to Order

Key Features
  • Manual V Port Ball Control Valve
  • 30°, 60° or 90° V Ball Control Options
  • Heavy Duty
  • Stainless Steel CF8M Body
  • ISO Direct Mounting Pad
  • BSP, NPT, Socket Weld or Butt Weld End Connections
  • Sizes: 1/2" to 2"
  • Supplied with Handle

Details

Mars Series 88 Manual V Notch Control Ball Valve

This V Control ball valve offers an excellent choice for modulating service. The series 88 ball valve has an encapsulated stainless steel three piece body, which offers easy maintenance. The V sector balls come in 30°, 60° and 90° options, designed to suit your exacting flow requirement.

Smaller, lighter and lower in cost than conventional globe or segmented valves, this high performance V sector ball valve offers consistent and accurate control.

V Control ball valves are used over conventional ball valves, giving greater control through the V segment.

Used to control temperature, flow, level and pH. The valve is easy to service, allowing maintenance to be undertaken whilst the valve is still in situ. Another important fact is the seat material is 50% stainless steel filled PTFE, allows greater life over soft seats. The machined ball and stem provides the best possible hysteresis.

The Mars Series 88 benefits from a direct mount ISO mounting top for actuation. When combined with electric or pneumatic actuation it offers low cost and light weight, easy automation.

Key features:

  • Stainless Steel CF8M Fully Encapsulated Body
  • 50% Stainless Steel / 50% PTFE filled seats.
  • Screwed BSP, NPT, Socket Weld and Butt Weld (Sch 40)
  • Sizes: Full Bore 1/2" to 2"
  • Antistatic device fitted
  • Temperature range: 20°C to +200°C
  • Operating pressure: 2000 PSI (1/4" to 1"), 1500 PSI (1 1/4" to 2") and 1000 PSI (2 1/2" to 4")
  • Insulated grip, lockable lever handle
  • Movement: 90° turn
  • ATEX approved

Images are for illustrative purposes only and may not be an indication of all variations/sizes of the product.

Datasheet:

 Mars V Sector Control Ball Valve Series 88 Datasheet

Technical Attributes

Manufacturer Mars
End Connection BSP, NPT, Socket Weld, Butt Weld OD
Body Material Stainless Steel
Seat Material 50% Stainless Steel / 50% PTFE filled
Size 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/4" (DN32), 1 1/2" (DN40), 2" (DN50)
Design 3 Piece, Full Bore, Female x Female
Lever Manual Lockable Lever
Temperature Range 20°C to +200°C
Pressure 2000 PSI (1/4" to 1"), 1500 PSI (1 1/4" to 2") and 1000 PSI (2 1/2" to 4")
Actuatable? Yes - ISO Mounting Top

Approvals

The following certs and approvals are available to download for the Mars Series 88:

 CE Cert

 PED Cert

 ATEX Cert

 SIL Cert

 PTFE Cert

Valve Sizing | Flow Rate (Kv)

Please check your required flow rate using the table below, prior to ordering your control valve. Flow coeffcients Kv measured in M3/h of water at 20°C based on 0.5 Bar pressure drop.

Valve Size: Ball Angle: 0% 15% 20% 30% 40% 50% 60% 70% 80% 90% 100%
1/2" 30° 0 0.0865 0.0865 0.173 0.2595 0.4325 0.692 0.9515 1.384 1.903 2.249
1/2" 60° 0 0.0865 0.0865 0.2595 0.4325 0.7785 1.211 1.73 2.8545 3.806 5.1899
1/2" 90° 0 0.0865 0.173 0.346 0.519 0.7785 1.2975 1.903 3.287 4.671 5.9685
3/4" 30° 0 0.0865 0.173 0.4325 0.6055 0.9515 1.557 2.076 2.8545 3.8925 4.671
3/4" 60° 0 0.0865 0.173 0.6055 0.865 1.4705 2422 3.46 5.6225 7.785 10.3799
3/4" 90° 0 0.173 0.346 0.692 1.038 1.73 2.6815 3.9789 6.92 9.7745 12.11
1" 30° 0 0.0865 0.2595 0.692 1.1245 1.9895 3.0275 4.41149 8.477 7.3525 8.65
1" 60° 0 0.173 0.346 0.9515 1.557 2.941 4.5845 6.8335 10.6395 13.2345 18.165
1" 90° 0 0.173 0.519 1.557 2.941 4.4115 7.0065 9.861 13.84 18.165 25.085
1 1/4" 30° 0 0.173 0.346 0.9515 1.73 3.2005 4.7575 6.92 8.65 11.245 12.975
1 1/4" 60° 0 0.173 0.519 1.557 2.595 4.7575 8.2175 11.072 16.435 22.49 33.735
1 1/4" 90° 0 0.2595 0.692 1.73 4.325 6.92 12.11 16.435 24.22 33.735 47.575
1 1/2" 30° 0 0.2595 0.519 1.384 2.595 4.325 6.4875 9.515 12.11 14.705 17.3
1 1/2" 60° 0 0.346 0.692 2.1625 3.46 6.92 11.245 16.435 23.355 34.6 44.98
1 1/2" 90° 0 0.346 0.7785 3.0275 6.055 11.245 17.3 26.815 36.33 54.495 67.47
2" 30° 0 0.346 1.038 3.287 5.19 8.65 12.975 19.895 26.815 37.195 51.9
2" 60° 0 0.346 1.297 3.979 7.785 14.2725 23.355 33.735 47.575 71.795 95.15
2" 90° 0 0.4325 1.73 5.19 10.38 19.03 30.275 38.925 60.55 90.825 116.775
2 1/2" 30° 0 0.346 0.865 3.46 6.92 10.38 15.57 24.22 32.005 53.63 64.875
2 1/2" 60° 0 0.346 1.297 4.325 8.65 18.165 29.41 45.845 64.875 89.095 129.75
2 1/2" 90° 0 0.4325 1.4705 6.055 12.11 24.22 41.52 60.55 91.69 138.4 188.57
3" 30° 0 0.4325 1.04 3.46 6.92 12.11 19.895 28.5449 39.79 56.225 70.9299
3" 60° 0 0.4325 2.1625 5.19 12.11 21.625 34.6 56.225 78.715 110.72 142.725
3" 90° 0 0.6055 3.0275 6.92 15.57 30.275 51.9 77.85 116.775 177.325 268.15

Please note:

To size the control valve / flow rate you require you should ideally aim for between 70% - 80% open rate. (This is an approximate way of sizing.) As an example, if you are looking for a flow of 7 m3/h you should select the 60° 1" ball at 70% fully open as shown below.

Should you wish to double check the correct sizing of your control valve please call our office on +44(0)1822 855600, +44(0)161 480 5700 or contact our technical department via email.

3/4" 30° 0 0.0865 0.173 0.4325 0.6055 0.9515 1.557 2.076 2.8545 3.8925 4.671
3/4" 60° 0 0.0865 0.173 0.6055 0.865 1.4705 2422 3.46 5.6225 7.785 10.3799
3/4" 90° 0 0.173 0.346 0.692 1.038 1.73 2.6815 3.9789 6.92 9.7745 12.11
1" 30° 0 0.0865 0.2595 0.692 1.1245 1.9895 3.0275 4.41149 8.477 7.3525 8.65
1" 60° 0 0.173 0.346 0.9515 1.557 2.941 4.5845 6.8335 10.6395 13.2345 18.165
1" 90° 0 0.173 0.519 1.557 2.941 4.4115 7.0065 9.861 13.84 18.165 25.085
Chat