• Home
  • General Purpose Pressure Gauge

General Purpose Pressure Gauge

  • General Purpose Pressure Gauge
  • Black enameled case
  • Plastic window
  • Brass / Bronze wetted parts
  • Sizes: 40mm to 160mm, 1/8" to 1/2"
  • -30 / 0 Bar up to 0 / 70 Bar
From £2.78
SKU: PG2000 Availability: Available
In stock
SKU PG2000

General Purpose Pressure Gauge

Our General Purpose Pressure Gauge forms part of our carefully selected range of gauges and accessories; ideally suited for the compressed air market sector, in addition to HVAC and pneumatic applications. Features a Black enameled steel case, plastic window and Brass / Bronze wetted parts. Configurable as either Bottom or Back Entry connection.

Suitable for gases, excluding oxygen or acetylene, up to a maximum of 25 Bar and the the measurement of fluid liquids that are NOT: high viscous, high temperature (over 60°C), likely to crystallize / solidify or that are corrosive to copper or tin alloys.

Key features:

  • Face diameter 40mm: 1/8", -30 / 0 Bar to 0 / 28 Bar, accuracy 2.5%
  • Face diameter 50mm: 1/8" to 1/4", -30 / 0 Bar to 0 / 28 Bar, accuracy 2.5%.
  • Face diameter 63mm: 1/4" to 3/8", -30 / 0 Bar to 0 / 70 Bar, accuracy 1.6%.
  • Face diameter 100mm: 3/8" to 1/2", -30 / 0 Bar to 0 / 70 Bar, accuracy 1.6%.
  • Face diameter 160mm: 3/8" to 1/2", -1 / 0 Bar to 0 / 414 Bar, accuracy 1%. Bottom connection only.

All our General Purpose Gauges are designed for applications and use according to European Standard EN837-1.

Download the General Purpose Pressure Gauge PDF datasheet

More Information
Type Pressure
Design / Use General Purpose
Entry Bottom, Back
Face Diameter 40mm, 50mm, 63mm, 100mm, 160mm
Range -30 / 0 Bar, 0 / 1 Bar, 0 / 2 Bar, 0 / 4 Bar, 0 / 7 Bar, 0 / 11 Bar, 0 / 14 Bar, 0 / 21 Bar, 0 / 28 Bar, 0 / 41 Bar, 0 / 70 Bar
Connection Size / Stem Length 1/8", 1/4", 3/8", 1/2"
Case Material Black Enameled Steel
Manufacturer VOLT

The following downloads are available for the General Purpose Pressure Gauge:

General Purpose Pressure Gauge Datasheet