Flanged PN16 Stainless Steel Low Pressure Reducing Valve

A low pressure reducing valve suitable for air and water. The valve features 316 stainless steel body, piston, shaft, and pressure gauge, 304 stainless steel fixing bolts, and adjusting stem, and available with options for NBR seals (with EPDM diaphragm), or VITON seals and diaphragm.

Available in sizes: DN15 to DN50, with flanges to fit PN16. The outlet pressure is adjusted via a threaded bolt and displayed on the pressure gauge. The valve has an outlet pressure adjustment range of 0.3 to 1.5 Bar, maximum inlet pressure of 10 Bar, is pressure tested to 16 Bar.

The working media temperature range is -15°C to +100°C, and maximum ambient temperature of +60°C. The valve should be mounted with the gauge upright, and the stem down.

KEY FEATURES:

• Flanged Low Pressure Reducing Valve
• Stainless Steel Body
• NBR or VITON seals
• Flanged PN16
• Sizes: DN15 to DN50
• Pressure adjustment range: 0.3-1.5 Bar