Industrial HVAC Pressure Gauge
- Industrial HVAC Pressure Gauge
- Black enameled steel case
- 30mm rear blow-out disc, window
- Brass / Bronze wetted parts
- Sizes: 3/8" to 1/2"
- -30 / 0 Bar up to 0 /70 Bar
-
Gauge Pressure Snubber
From £29.90SKU: GA2011 Availability: Available -
Gauge Syphon
From £11.92SKU: GA2009 Availability: Available -
Brass Gauge Cock
From £11.92SKU: GA2008 Availability: Available
Details
Industrial HVAC Pressure Gauge
Our Industrial HVAC Gauge forms part of our carefully selected range of gauges and accessories; ideally suited for all HVAC applications. Features a Black enameled steel case, 30mm rear safety blow-out disc, Stainless Steel removable bezel, polycarbonate window (glass on 1/2" Bottom Entry) and Brass / Bronze wetted parts. Configurable as either Bottom or Back Entry connection.
Suitable for gases, excluding oxygen or acetylene, up to a maximum of 25 Bar and the the measurement of fluid liquids that are NOT: high viscous, high temperature (over 60°C), likely to crystallize / solidify or that are corrosive to copper or tin alloys.
Key features:
- Bottom Entry: Slim or Standard case, 3/8" to 1/2", -30 / 0 Bar to 0 / 70 Bar, accuracy 1%.
- Back Entry: Standard case, 3/8" to 1/2", -30 / 0 Bar to 0 / 70 Bar, accuracy 1%.
All our Industrial HVAC Gauges are designed for applications and use according to European Standard EN837-1.
Datasheet:
Technical Attributes
Type | Pressure |
---|---|
Design / Use | Industrial, HVAC |
Entry | Bottom, Back |
Range | -30 / 0 Bar, -1 / 0 Bar, 0 / 1 Bar, 0 / 2 Bar, 0 / 4 Bar, 0 / 7 Bar, 0 / 11 Bar, 0 / 14 Bar, 0 / 21 Bar, 0 / 28 Bar, 0 / 41 Bar, 0 / 70 Bar |
Connection Size / Stem Length | 3/8", 1/2" |
Case Material | Black Enameled Steel |
Manufacturer | VOLT |
Downloads
The following downloads are available for the Industrial HVAC Pressure Gauge: