• Home
  • Burkert Type 8801 ELEMENT Angle Seat Valve System for Steam and Gas

Burkert Type 8801 ELEMENT Angle Seat Valve System for Steam and Gas

  • Pneumatically operated angle seat valve
  • 2 Way, normally closed, flow above seat
  • Stainless steel body
  • BSP Threaded / G Thread, Clamp or Weld ends
  • Sizes: G1/2 to G2 / DN15-DN50
  • Suitable for steam and gas
From £425.10
SKU: YS8801 Availability: Available
In stock
SKU YS8801

Burkert Type 8801 ELEMENT Angle Seat Valve for Steam and Gas

Burkert Type 8801 On/Off Angle Seat Valve Control System, for steam and gas, comprising of:

Type 2100 ELEMENT pneumatically operated on/off angle seat valve; incorporates and improves upon the traditional design of the type 2000 piston valve. 2 Ways, 2 Position, normally closed with flow above seat for use with steam up to a maximum of 10 Bar.

Stainless Steel construction offering superior protection in hygienic and chemically harsh environments. The construction of the 2100 angle seat valve fulfils the tough criteria of process environments and provides long trouble free service life thanks to the ELEMENT actuator and proven technology of the self-adjusting V seals. Suitable for steam, gases and compressed air the flow above seat provides secure isolation of the media.

Burkert Type 8697/8690 control tops, fit securely onto the ELEMENT actuators and provide Open/Close position feedback through two proximity switches with the option of controlling the process valve by way of a 24VDC pilot solenoid. The control top utilises internal control air channels and a unique design that enables recycling of the process air to prevent environmental contamination of the actuator’s internal chambers. Combined with the IP65 electrical protection and the chemically resistant housing, the valve is ideally suited to demanding process environments.

Key features:

  • Available in sizes: DN15 up to DN50 and G 1/2 to G 2.
  • End connections: Screwed BSP, Clamp End (ASME BPE / BS4825) or Weld End (BS4825).
  • Media temperature: -10°C to +185°C.
  • Pressure: 10 Bar maximum.
  • Unrivalled cycle life and sealing integrity is guaranteed by the proven self adjusting spindle packing with V-seals.
  • Not suitable for liquids.

Datasheets:

Burkert Type 8801 ELEMENT Angle Seat Valve System Datasheet (EN)

Burkert Type 2100 ELEMENT Angle Seat Valve Datasheet (EN)

Burkert Type 8690 Datasheet (EN)

Burkert Type 8697 Datasheet (EN)

More Information
Media Steam, Gas
Body Material Stainless Steel
Function Normally Closed
End Connection BSP, G Thread, OD Weld End, Tri-clamp
Size G1/2, G3/4, G1, G1 1/4, G1 1/2, G2, 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1 1/2" (DN40), 2" (DN50)
Manufacturer Burkert

No Related Posts