Burkert 6213 Brass Solenoid Valve with Kick & Drop Coil

Burkert Type 6213 Normally Closed Brass Solenoid Valve with Kick & Drop Coil

Burkert’s Type 6213 Brass body with FKM seal solenoid valve is normally closed, servo-assisted 2/2 way, and available in sizes from G3/8” to G2".

This Type 6213 Solenoid Valve from Burkert has a Kick and Drop coil that enables the holding power to be reduced up to 14 watts. These Kick and Drop coils are efficient, durable, and strong with energy savings up to 80% with dual coil technology. These coils also extend service live and reduce calcification due to lower self-heating and feature up to 200% more activation power.

The areas of use for the Kick and Drop coil are very diverse, and they are used particularly frequently in the installation and heating sector. The Kick and Drop coil can be used anywhere where the following conditions need to be met:

• Energy should be saved
• Water that contains a particular amount of lime must be controlled
• In buildings where faults must be excluded by electromagnetic fields
• Anywhere where fluids and gases to be controlled must not be heated to over 55 °C
• Anywhere where continuously active solenoid valves, such as gas or tap water safety valves, are operated in buildings
• Anywhere where particularly battery-buffered drainage systems are used, to guarantee a longer, safer operating time

Other materials and seals are available on request.

Key Features:

• Brass Body
• Sizes: G3/8” up to G2”
• Seal Material: FKM
• Voltage: 24V AC, 24V DC and 230V AC
• Energy Saving Kick & Drop Coil
• Normally Closed
• Pressure Range: 0 – 10 Bar