Inoxpa 8200 Hygienic Sampling Valve
Hygienic Sample Valve
Inoxpa 8200 Hygienic Sampling Valve in polished 304L Stainless Steel with easy adjustment knurled wheel, threaded male inlet (ISO 228-1) and NBR FDA approved seals. Available in sizes: 1/4" and 1/2". Suitable for use in process applications to identify, control quality and / or for regulatory assessment of fluid / media directly from the pipeline.
This sampling valve is designed to take samples in liquid process plant for the food-processing, beverage and chemical industries.
Images are for illustrative purposes only and may not be an indication of all variations/sizes of the product.
The sample is obtained by unscrewing the head to separate the membrane from its place to allow the fluid to enter the outlet tube.
- Material: Investment Cast 304L Stainless Steel
- Available in sizes: 1/4" and 1/2"
- Max Working pressure: 6 Bar
- FDA approved
Design and features
- Ø available: ¼’’ and ½’’
- Thread connection ISO 228-1
- Metal parts: AISI 304L
- Pivot lock: PTFE
- O-ring: NBR
- External surface finish Electropolished
- Max. working pressure 6 bar
- Min. working pressure 0,1 bar
- Temperature -30ºC to 100ºC
- 30ºC (SIP, max. 30 min)
Joint seals in hygienic valves are free from dead zones, removing the risk of bacteria and debris build up.
|Connection||Threaded Connection ISO 228-1|
|Body Material||Stainless Steel AISI 304L|
|Seal Material||NBR - FDA Approved|
|Temperature Range||-30ºC to 100ºC (30ºC SIP, Max 30 Min)|
|Pressure||Max. working pressure: 6 bar, Min. working pressure 0,1 bar|
The following downloads are available for the Inoxpa 8200 Hygienic Sampling Valve: