The VOLT pneumatic actuated butterfly valve is suitable for use on potable water and the valve carries a WRAS Approval.
The valve is a Lugged and Tapped pattern design which will fit onto PN16 flanges. It has an epoxy coated ductile iron body, a stainless steel disc and shaft with an EPDM liner.
The actuators are manufactured from aluminium, have a hard anodised finish and are ATEX approved/CE marked.All actuators are designed to the latest ISO/NAMUR standards which allow direct mounting of pilot solenoids and switchboxes.
This valve is commonly used for applications such as ‘End of Line Duty’ or fitted before a pump for maintenance isolation.
Key Features:
Spring Return or Double Acting Actuator
Lugged and Tapped to suit PN16 Flanges
Epoxy Coated Ductile Iron Body
Stainless Steel Disc and Shaft
EPDM Liner
Temperature: -10°C - 120°C
Sizes: 2" to 12"
WRAS Approved
Images are for illustrative purposes only and may not be an indication of all variations/sizes of the product.
Approval
This product has been examined, tested and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Bylaws.
Â
A valid certificate and approval number can be obtained upon request.