Details

Economy Pneumatic Actuated WRAS Approved Fully Lugged and Tapped Butterfly Valve

A pneumatic actuated butterfly valve is suitable for use on potable water and the valve carries a WRAS Approval. Best suited for end of line service or where pump maintenance needs to be carried out.

The valve is a Lugged design which will fit between PN16 flanges. It has an epoxy coated ductile iron body, a stainless-steel disc and shaft with an EPDM liner.

The actuators are manufactured from aluminium, have a hard anodised finish and are ATEX approved/CE marked. Offered in both single and double acting (spring closed commonly used to close the valve on air failure) All actuators are designed to the latest ISO/NAMUR standards which allow direct mounting of pilot solenoids and switchboxes.

Key Features:

• Spring Return or Double Acting Actuator
• Lugged and Tapped
• To fit between PN16
• Epoxy Coated Ductile Iron Body
• Stainless Steel Disc and Shaft
• EPDM liner
• Sizes: 2" to 12"
• Pressure: PN16
• Temperature: -10°C to 120°C
• WRAS Approved (2" to 12" only)

Pneumatic Actuated Butterfly Valves are designed to meet the demanding needs of today's process flow control requirements, offering complete confidence as an integral part of your automatic system. During build up all actuated packages are rigorously inspected, and 100% factory tested prior to dispatch.

Datasheet:

 Economy Lugged Butterfly Valve With Pneumatic Actuator Datasheet